Tenda TEF1118P1610/100 Mbps PoE 1 Gigabit/ SFP places Switch
TEF1118P-16-150W not only offers1610/100 Mbps Base- TX RJ45 anchorages, but also110/100/ 1000 Mbps Base- T RJ45 anchorages and 1 1000 Mbps Base- X SFP harborage. Anchorages 1- 16 misbehave with the IEEE802.3 af standard and802.3 at standard and each harborage can support a maximum PoE power affair of 30 W. The switch offers a maximum PoE power affair of 135 W and it can supply power when swapping data with APs, IP cameras, and IP phones through CAT5 lines. It also provides simple operation modes similar as CCTV, VLAN, and Extend to help reducing cabling costs of IP outstations. In real design, ap or cameras are frequently installed out-of-door or in a advanced position, which also increases the probability of lightning shock toward the cameras and PoE switches. thus, some of the accoutrements may be damaged and indeed the whole original area network( LAN) may beparalyzed.Tenda TEF11 series switches have professional lightning protection design †“ 6KV harborage and power force thunder prevents. These two protection design can effectively inhibit the lightning current from the network string and power force, which is original to add a security Walls to the entire network monitoring system. And the test norms are far advanced than the conditions of the state CCC. In the showers, the monitoring network can also give stable and dependable services to the monitoring network and insure the normal transmission of the images. CCTV 1- 8 anchorages support QoSï ¼ ŒIf multiple IP cameras are connected to the switch, you're recommended to enable this mode and connect the G1 or SFP1 harborage of this switch to the upstream deviceï ¼ Œlike the covering computer. This ensures smoother monitoring videotape playback. Standard The switch†™ s functions are analogous with a common unmanaged switch†™ s and all the anchorages of the switch can communicate with each other. VLAN In this mode, 1- 24 anchorages of the switch can not communicate with each other, but can communicate with the G1 and SFP1 anchorages. It can be used to insulate broadcast storms and DHCP broadcasts. Extend In this mode, the data rate of 1- 8 harborage is limited to 10 Mbps, whereas the maximum transmission distance of the harborage is increased to 250 measures. All the anchorages of the switch can communicate with each other. Anchorages 1- 16 misbehave with the IEEE802.3 af and IEEE802.3 at power force norms. The entire switch offers a maximum PoE power affair of 135 W, whereas each harborage offers a maximum PoE power affair of 30 W. The anchorages can be used to supply power to APs and IP cameras while exchange data.
